SAMSUNG Error Code 1682
MEDIUMCommon IssueToner Cartridge Not Detected or Incorrectly Installed
Error 1682 on Samsung printers typically indicates that the toner cartridge is either not recognized, improperly seated, or missing.
The Samsung Error 1682 is a common issue related to the printer's inability to detect the toner cartridge. This can happen for several reasons, such as the cartridge not being fully inserted into its slot, protective packaging (like sealing tape) not being completely removed from a new cartridge, or a faulty connection between the cartridge and the printer's sensors. The printer relies on these sensors to confirm the presence and type of toner, and if this communication fails, it will halt operations and display this error. Sometimes, the error can also stem from a dirty or obstructed contact point on either the cartridge or within the printer itself, preventing proper electrical communication. Less commonly, a defective toner cartridge or an internal printer hardware issue related to the toner detection mechanism could be the root cause. This error prevents printing until the cartridge is correctly recognized, as the printer cannot function without a confirmed toner supply.
- 1
Turn off the printer and unplug it from the power source.
- 2
Open the printer's front cover or access panel to expose the toner cartridge area.
- 3
Carefully remove the toner cartridge from its slot. If it's a new cartridge, double-check that all protective seals, tapes, or orange clips have been completely removed.
- 4
Gently wipe the metallic contacts on the toner cartridge and inside the printer's cartridge slot with a clean, dry, lint-free cloth or a cotton swab. Be careful not to damage them.
- 5
Reinsert the toner cartridge firmly into its slot until you hear a click or feel it lock into place. Ensure it is seated correctly and not tilted.
- 6
Close the printer's cover or access panel.
- 7
Plug the printer back into the power outlet and turn it on.
- 8
Wait for the printer to initialize and check if the error code has cleared. If not, try installing a different, known-good toner cartridge if available, to rule out a faulty cartridge.
You should consider calling a specialist if, after trying all the DIY steps, the error 1682 persists. This could indicate a more serious internal hardware problem within the printer's toner detection system or the main board. If you've tried multiple toner cartridges and confirmed they are correctly installed, and the error still appears, professional diagnosis will be necessary. Attempting to repair internal components without expertise could cause further damage.
Find a certified printer specialist near you →$100-$250 (if internal hardware repair is needed)
Actual costs may vary based on location and specialist
- • Samsung ML-Series (e.g., ML-2165W)
- • Samsung SCX-Series (e.g., SCX-3405F)
- • Samsung Xpress M-Series (e.g., M2070FW)
This content is licensed under CC BY-SA 4.0 and is original educational material created by PrinterSpecialists.org. Not affiliated with SAMSUNG.